Events
Lab 1 & 2: 1st & 2nd Year – Olympia
Pipe Bending (EMT & PVC), concentric bends, wire pulling, box fill, job planning, hypothetical projects, estimating material needs. Parts and pieces and how they are used. Making material lists.
2014 – 2015 Orientation
2014-2015 Orientation: This is the first class of the new school year. Attendance is mandatory for all apprentices. You should have received the registration link in your email. Please check your junk email as well. If you do not have it, please contact Eldon (Eldon@iecofwa.org).
Do not register via email. You MUST register using your First AND Last name as you are registered with IEC of Washington. No nicknames. You will be marked absent if you do not follow this procedure. We cannot award credit for people who do not register properly.
2014 – 2015 Orientation
2014-2015 Orientation: This is the first class of the new school year. Attendance is mandatory for all apprentices. You should have received the registration link in your email. Please check your junk email as well. If you do not have it, please contact Eldon (Eldon@iecofwa.org).
Do not register via email. You MUST register using your First AND Last name as you are registered with IEC of Washington. No nicknames. You will be marked absent if you do not follow this procedure. We cannot award credit for people who do not register properly.
CPR training
2014-2015 CPR training: Attendance is mandatory for all apprentices. You should have received the registration link in your email. Please check your junk email as well. If you do not have it, please contact Eldon (Eldon@iecofwa.org).
You need only attend ONE of the CPR training classes; choose the day that best fits your schedule (August 27th or 28th).
Do not register via email. You MUST register using your First AND Last name as you are registered with IEC of Washington. No nicknames. You will be marked absent if you do not follow this procedure. We cannot award credit for people who do not register properly.
CPR training
2014-2015 CPR training: Attendance is mandatory for all apprentices. You should have received the registration link in your email. Please check your junk email as well. If you do not have it, please contact Eldon (Eldon@iecofwa.org).
You need only attend ONE of the CPR training classes; choose the day that best fits your schedule (August 27th or 28th).
Do not register via email. You MUST register using your First AND Last name as you are registered with IEC of Washington. No nicknames. You will be marked absent if you do not follow this procedure. We cannot award credit for people who do not register properly.
Late tuition due TODAY!
Late tuition is due today, August 29, by 5:00 PM. Please contact our main office line at: (866) 959-2432 to finalize your tuition.
First Aid training
2014-2015 First Aid training: Attendance is mandatory for all apprentices. You should have received the registration link in your email. Please check your junk email as well. If you do not have it, please contact Eldon (Eldon@iecofwa.org).
You need only attend ONE of the first aid training classes; choose the day that best fits your schedule (Sept. 3rd or 4th).
Do not register via email. You MUST register using your First AND Last name as you are registered with IEC of Washington. No nicknames. You will be marked absent if you do not follow this procedure. We cannot award credit for people who do not register properly.
First Aid Training
2014-2015 First Aid training: Attendance is mandatory for all apprentices. You should have received the registration link in your email. Please check your junk email as well. If you do not have it, please contact Eldon (Eldon@iecofwa.org).
You need only attend ONE of the first aid training classes; choose the day that best fits your schedule (Sept. 3rd or 4th).
Do not register via email. You MUST register using your First AND Last name as you are registered with IEC of Washington. No nicknames. You will be marked absent if you do not follow this procedure. We cannot award credit for people who do not register properly.
Years 1 & 2; Labs 1 & 2
Years 1 & 2 are required to attend labs 1 & 2.
Classroom materials: 101 – 102
Classroom materials: 201 – 202
Classroom materials: 301 – 303
OJT reports due today!
Classroom materials: 402
Apprentiship and Training Committee meeting
ALL YEARS; Lab 1 & 2
All student years must attend. Please contact Eldon for more information at: Eldon@iecofwa.org; information also provided during online classroom presentation.
Classroom materials: 105 – 106
Classroom materials: 203
Classroom materials: 304 – 305
MAKEUP COURSEWORK DAY
Please contact our main office line at (866) 959-2432 to determine makeup coursework and to schedule a time for makeup.
Classroom materials: 403
Years 1 & 2; Lab 1 & 2
Classroom materials: 107
Classroom materials: 204
Classroom materials: 304
Classroom materials: 404
DEADLINE: 2015 – 2016 coursework payment plan due (save $200!)
Please contact our main office line at (866) 959-2432 to discuss the IEC of Washington payment plan. This will allow you to save $200 on tuition!
Years 1 & 2; Lab 1 & 2
Classrrom materials: 108
Classroom materials: 205 – 206
Classroom materials: 307
Classroom matrials: 405
All Years; Lab 1 & 2
Classroom materials: 109
Classroom materials: 207
Classroom materials: 308
Classroom materials: 406 – 407
OJT reports due
All years; Lab 1 & 2
Classroom materials: 110
Classroom materials: 208
Classroom materials: 309
MAKE UP DAY
Please call our main office line to establish a make up time. Main line: (866) 959-2432
Classroom materials: 408
Years 3 & 4; Lab 1 & 2
EXAMS: All years; Vancouver, South Sound
Exams: All years; Everett
EXAMS: All years; Wenatchee, Tri-Cities
EXAM: All years; Spokane
Years 3 & 4; Lab 1 & 2
Classroom materials: 112
Classroom materials: 210 – 211
Classroom materials: 311
Classroom materials: 410
Years 3 & 4; Lab 1 & 2
Classroom materials: 113
Classroom materials: 212
Classroom materials: 312
Classroom materials: 411
Years 3 & 4; Lab 1 & 2
Classroom materials: 114
OJT reports due
Classroom materials: 213
Classroom materials: 313
Classroom materials: 412 – 413
Apprenticeship and Training Committee meeting
All years; Lab 3 & 4
Classroom materials: 115
Classroom materials: 214
Classroom materials: 314
Classroom materials: 414
Years 1 & 2; Lab 3 & 4
Thanksgiving!
Classroom materials: 116
Classroom materials: 215 – 216
Classroom materials: 315
Classroom materials: 415
Years 1 & 2; Lab 3 & 4
Classroom materials: 117
Classroom materials: 217
Classroom materials: 316 – 317
MAKE UP WORK DAY
Please contact our main office line at (866) 959-2432 to set up a time to make up work.
OJT Reports due today
Classroom materials: 416 – 417
Years 1 & 2; Lab 3 & 4
EXAMS: All years; Vancouver and South Sound
EXAMS: All years; Everett
EXAMS: All years; Wenatchee and Tri-Cities
EXAMS: All years; Spokane
Years 1 & 2; Lab 3 & 4
Christmas Break
REVIEW WEEK
REVIEW WEEK
REVIEW WEEK
Apprenticeship and Training Committee meeting
REVIEW WEEK
OJT Reports Due
Years: ALL; Lab 3 & 4
Classroom materials: 119
Classroom materials: 219
Classroom materials: 319 – 320
Classroom materials: 419 – 420
Years 3 & 4; Lab 3 & 4
Classroom materials: 120 – 121
Classroom materials: 220
Classroom materials: 321
MAKEUP DAY
To schedule makeup work, please contact our main office at: (866) 959-2432
Classroom materials: 421 – 422
Years 3 & 4; Lab 3 & 4
Classroom materials: 122 – 123
Classroom materials: 221
Classroom materials: 322
Classroom materials: 423
Years 3 & 4; Lab 3 & 4
Classroom materials: 124
Classroom materials: 222 – 223
Classroom materials: 323
Classroom materials: 424
Years 3 & 4; Lab 3 & 4
Classroom materials: 125
OJT Reports DUE
Classroom materials: 224 – 225
Classroom materials: 324 – 325
Classroom materials: 425
Years 1 & 2; Lab 5 & 6
Classroom materials: 126
Classroom materials: 226
MAKEUP DAY
To schedule a makeup, please call our main office line at: (866) 959-2432
Classroom materials: 326 – 327
Classroom materials: 426
Years 1 & 2; Lab 5 & 6
EXAMS: All years; Vancouver, South Sound
EXAMS: All years; Everett
EXAMS: All years; Wenatchee, Tri-Cities
EXAMS: All years; Spokane
Years 1 & 2; Lab 5 & 6
Classroom materials: 128
Classroom materials: 228
Classroom materials: 329
Classroom materials: 428
Years 1 & 2; Lab 5 & 6
Classroom materials: 129
Classroom materials: 229
OJT reports due
Please contact our main office line if you have any questions regarding filing of your OJT report. IEC of Washington mainline: (866) 959-2432
Classroom materials: 330
Apprenticeship and Training Committee meeting
Classroom materials: 429
ALL years; Lab 5 & 6
Classroom materials: 130
Classroom materials: 230
Classroom materials: 331
MAKEUP DAY
Please call out main office line at (866) 959-2432 to learn how to schedule your make up work.
Classroom materials: 430
Years 3 & 4; Lab 5 & 6
Classroom materials: 131 – 132
Classroom materials: 231 – 232
Classroom materials: 332
Classroom materials: 431
DEADLINE: Discounted payment plan begins today
You may pay for the 2015 – 2016 IEC of Washington school year starting today, and will receive a $100 discount with our payment plan! Please call our main office line today at: (866) 959-2432 to speak with our customer service rep.
Years 3 & 4; Lab 5 & 6
Classroom materials: 133
Classroom materials: 233
Classroom materials: 333
Classroom materials: 432
Years 3 & 4; Lab 5 & 6
Classroom materials: 134
Classroom material: 234
Classroom material: 334
Classroom materials: 433
OJT reports due
Please contact our main office line at (866) 959-2432 if you have any questions regarding the filing of your OJT report.
Years 3 & 4; Lab 5 & 6
Classroom materials: 135
Classroom materials: 235
MAKEUP DAY
Please contact the main IEC of Washington office at (866) 959-2432 to learn more about how to schedule your makeup work.
Classroom materials: 335
Classroom materials: 434 – 435
ALL Years; Lab 5 & 6
WAC / RCW
WAC / RCW
EXAMS: ALL Years; Vancouver, South Sound
EXAMS: ALL Years; Everett
EXAMS: ALL Years; Wenatchee, Tri-Cities
EXAMS: ALL Years; Spokane
GRADUATION
OJT reports due
Please contact our main office line at (866) 959-2432 if you have any question regarding the filing of your OJT Report.
Apprenticeship and Training Committee meeting
MAKEUP DAY for missed Graduation
Please contact the IEC of Washington main office line at (866) 959-2432 to learn how to schedule your makeup work.
OJT reports due
Please call our main office line at (866) 959-2432 if you have any questions regarding the filing of your OJT report.
OJT report due
Please contact our main office line at (866) 959-2432 if you have any questions regarding the filing of your OJT report.
2015 – 2016 Class Tuition Deadline
Please contact our main office line prior to today to schedule payment for the upcoming school year! All payments after this date are late and an additional fee will be applied. Please call our main office at: (866) 959-2432 to schedule your payment today!
Tuition late fee applied
Lesson 101: Orientation and Basic Principles
To remain on schedule, you should complete this class sometime during this week.
Lesson 102: Tools and Blueprints
To remain on schedule, you should complete this class sometime during this week.
Lesson 201: Orientation, Safety, Introduction to Meters, Feeder/Branch Circuits
To remain on schedule, you should complete this class sometime during this week.
Lesson 202: Service Calculations
To remain on schedule, you should complete this class sometime during this week.
Lesson 301: Electrical Safety: A Practical Guide to OSHA and NFPA 70E
To remain on schedule, you should complete this class sometime during this week.
Lesson 302: Introduction to Grounding and Bonding
To remain on schedule, you should complete this class sometime during this week.
Lesson 303: General Requirements for Grounding and Bonding
To remain on schedule, you should complete this class sometime during this week.
Lesson 402: Power Distribution Systems
To remain on schedule, you should complete this class sometime during this week.
Lesson 105: Applied Math-Circuit Theory-Plans & Specs
To remain on schedule, you should complete this class sometime during this week.
Lesson 106: Conduit Bending
To remain on schedule, you should complete this class sometime during this week.
Lesson 203: Services
To remain on schedule, you should complete this class sometime during this week.
Lesson 304: System Grounding 1
To remain on schedule, you should complete this class sometime during this week.
Lesson 305: System Grounding 2
To remain on schedule, you should complete this class sometime during this week.
Lesson 403: Phase-Loss Lab and Solid -State Relays and Starters
To remain on schedule, you should complete this class sometime during this week.
Lesson 107: Applied Math-Electrical Symbols & Outlets-Ohm’s Law
To remain on schedule, you should complete this class sometime during this week.
Lesson 204: Conductor and Overcurrent Protection
To remain on schedule, you should complete this class sometime during this week.
Lesson 306: Grounding Electrode System and Grounding Electrode Conductor
To remain on schedule, you should complete this class sometime during this week.
Lesson 404: On-Delay, Interval, and Recycle Timers
To remain on schedule, you should complete this class sometime during this week.
Lesson 108: General-Purpose and Small-Appliance Circuit
To remain on schedule, you should complete this class sometime during this week.
Lesson 205: Grounding and Bonding Terminology and Service Grounding Components
To remain on schedule, you should complete this class sometime during this week.
Lesson 206: Grounding Electrode System and Equipment Bonding
To remain on schedule, you should complete this class sometime during this week.
Lesson 307: Enclosure, Raceway, and Service Cable Connections-Bonding
To remain on schedule, you should complete this class sometime during this week.
Lesson 405: Timing Relay Practical Application Lab
To remain on schedule, you should complete this class sometime during this week.
Lesson 109: Conductor Sizes, Types and Connections-Type NM Cables
To remain on schedule, you should complete this class sometime during this week.
Lesson 207: Wiring Methods
To remain on schedule, you should complete this class sometime during this week.
Lesson 308: Equipment Grounding and Equipment Grounding Conductors
To remain on schedule, you should complete this class sometime during this week.
Lesson 406: Off-Delay, One-Shot, and Multifunction Timers
To remain on schedule, you should complete this class sometime during this week.
Lesson 407: Timing Relay Practical Application Lab-Advanced
To remain on schedule, you should complete this class sometime during this week.
Lesson 110: Voltage Drop, Other Wiring Methods, and Printreading
To remain on schedule, you should complete this class sometime during this week.
Lesson 208: Wiring Materials, Conduit and Box Fill
To remain on schedule, you should complete this class sometime during this week.
Lesson 309: Methods of Equipment Grounding and Specific Equipment
To remain on schedule, you should complete this class sometime during this week.
Lesson 408: Counters and Sensors
To remain on schedule, you should complete this class sometime during this week.
Lesson 112: Switch Control
To remain on schedule, you should complete this class sometime during this week.
Lesson 210: Switches, Switchboards and Panelboards
To remain on schedule, you should complete this class sometime during this week.
Lesson 211: Equipment for General Use
To remain on schedule, you should complete this class sometime during this week.
Lesson 311: Printreading: Project Design, Development, and Specification
To remain on schedule, you should complete this class sometime during this week.
Lesson 410: Motor Starting Methods
To remain on schedule, you should complete this class sometime during this week.
Lesson 113: GFCI and Arc-Fault Protection
To remain on schedule, you should complete this class sometime during this week.
Lesson 212: Introduction to AC Theory
To remain on schedule, you should complete this class sometime during this week.
Lesson 312: Printreading: Survey, Civil, and Structural Drawings
To remain on schedule, you should complete this class sometime during this week.
Lesson 411: Motor Drives- Accelerating and Decelerating Methods
To remain on schedule, you should complete this class sometime during this week.
Lesson 114: Luminaires (Lighting Fixtures)
To remain on schedule, you should complete this class sometime during this week.
Lesson 213: AC Theory 1
To remain on schedule, you should complete this class sometime during this week.
Lesson 313: Printreading: Architectural Drawings 1
To remain on schedule, you should complete this class sometime during this week.
Lesson 412: Introduction to Programmable Controllers
To remain on schedule, you should complete this class sometime during this week.
Lesson 413: Advanced Lab-Automatic Car Wash
To remain on schedule, you should complete this class sometime during this week.
Lesson 115: Front Bedroom Lighting and Introduction to Series Circuits
To remain on schedule, you should complete this class sometime during this week.
Lesson 214: AC Theory 2
To remain on schedule, you should complete this class sometime during this week.
Lesson 314: Printreading: Architectural Drawings 2
To remain on schedule, you should complete this class sometime during this week.
Lesson 414: Energy Management and Building Automation
To remain on schedule, you should complete this class sometime during this week.
Thanksgiving Break
Lesson 116: Master Bedroom Branch Circuit and Level 2-Series Circuits
To remain on schedule, you should complete this class sometime during this week.
Lesson 215: Single-Phase Transformation Part 1
To remain on schedule, you should complete this class sometime during this week.
Lesson 315: Printreading: MEP, M, E, P, and Special Prints
To remain on schedule, you should complete this class sometime during this week.
Lesson 415: Fire Suppression System Control of Kitchen Equipment and Advanced Lab
To remain on schedule, you should complete this class sometime during this week.
Lesson 117: Lighting and Small Appliance Branch Circuits
To remain on schedule, you should complete this class sometime during this week.
Lesson 216: Single-Phase Transformation Part 2
To remain on schedule, you should complete this class sometime during this week.
Lesson 217: First Semester Exam Review
To remain on schedule, you should complete this class sometime during this week.
Lesson 316: Project Planning: Foreman Training
To remain on schedule, you should complete this class sometime during this week.
Lesson 317: First Semester Exam Review
To remain on schedule, you should complete this class sometime during this week.
Lesson 416: Preventive Maintenance and Troubleshooting
To remain on schedule, you should complete this class sometime during this week.
Lesson 417: First Semester Exam Review
To remain on schedule, you should complete this class sometime during this week.
Christmas/ New Year Break
Lesson 119: Living Room, Study/Bedroom Branch Circuits and Introduction to Parallel Circuits
To remain on schedule, you should complete this class sometime during this week.
Lesson 219: Power Generation=Three-Phase Transformers, Circuits, and Calculations
To remain on schedule, you should complete this class sometime during this week.
Lesson 319: Electrical Quantities, Circuits, Test Instruments and Safety
To remain on schedule, you should complete this class sometime during this week.
Lesson 419: Introduction, Definitions, and Boxes
To remain on schedule, you should complete this class sometime during this week.
Lesson 120: Laundry Outlets and Parallel Circuits
To remain on schedule, you should complete this class sometime during this week.
Lesson 220: Three-Phase Transformers-Delta-Delta
To remain on schedule, you should complete this class sometime during this week.
Lesson 320: Manual Control Circuits: Devices and Symbols-Logic and Diagrams
To remain on schedule, you should complete this class sometime during this week.
Lesson 420: Cables
To remain on schedule, you should complete this class sometime during this week.
Lesson 121: Garage Circuits and Parallel Circuit Calculations
To remain on schedule, you should complete this class sometime during this week.
Lesson 221: Three-Phase Transformers-Delta-Wye
To remain on schedule, you should complete this class sometime during this week.
Lesson 321: Introduction to Contractors and Relays
To remain on schedule, you should complete this class sometime during this week.
Lesson 421: Raceways and Conductors
To remain on schedule, you should complete this class sometime during this week.
Lesson 122: Special Purpose Outlets and Water Heaters
To remain on schedule, you should complete this class sometime during this week.
Lesson 222: Transformers for Non-Linear Loads-Three-Phase Fault Currents-Voltage Drop
To remain on schedule, you should complete this class sometime during this week.
Lesson 322: Applications Using Contactors and Relays
To remain on schedule, you should complete this class sometime during this week.
Lesson 422: Residential Single Family-General Provisions
To remain on schedule, you should complete this class sometime during this week.
Lesson 123: Special Purpose Outlets- Kitchen
To remain on schedule, you should complete this class sometime during this week.
Lesson 223: NEC Requirements for Transformers
To remain on schedule, you should complete this class sometime during this week.
Lesson 323: Manual and Automatic Control Devices
To remain on schedule, you should complete this class sometime during this week.
Lesson 423: Specific Provisions: Residential Single-Family Dwellings
To remain on schedule, you should complete this class sometime during this week.
Lesson 124: Special Purpose Outlets-Bathrooms, Exhaust Fans and Hydromassage Tubs
To remain on schedule, you should complete this class sometime during this week.
Lesson 224: Buck–Boost Transformers: Single- and Three-Phase
To remain on schedule, you should complete this class sometime during this week.
Lesson 324: Ladder Diagrams Using Manual and Automatic Control Devices
To remain on schedule, you should complete this class sometime during this week.
Lesson 325: Practical Application Lab: Automatic Controls
To remain on schedule, you should complete this class sometime during this week.
Lesson 424: Residential and Commercial Services and Equipment
To remain on schedule, you should complete this class sometime during this week.
Lesson 125: Heating and Air Conditioning
To remain on schedule, you should complete this class sometime during this week.
Lesson 225: Buck-Boost Transformers: Connection and Selection
To remain on schedule, you should complete this class sometime during this week.
Lesson 326: Magnetic Motor Starters
To remain on schedule, you should complete this class sometime during this week.
Lesson 425: Multifamily Dwellings and Commercial Installations-General Provisions
To remain on schedule, you should complete this class sometime during this week.
Lesson 126: Low Voltage and Fire Alarms
To remain on schedule, you should complete this class sometime during this week.
Lesson 226: Generators and Transfer Switches
To remain on schedule, you should complete this class sometime during this week.
Lesson 327: Practical Application Lab: Pilot Devices and Holding Contacts
To remain on schedule, you should complete this class sometime during this week.
Lesson 426: Hazardous Locations and Health Care Facilities
To remain on schedule, you should complete this class sometime during this week.
Lesson 128: Recreation Room, Multiwire Branch Circuits and Introduction to Combination Circuits
To remain on schedule, you should complete this class sometime during this week.
Lesson 228: Electric Motors-DC and One-Phase AC
To remain on schedule, you should complete this class sometime during this week.
Lesson 329: Motor Overload Protection and Connection
To remain on schedule, you should complete this class sometime during this week.
Lesson 428: Special Occupancies and Specific Equipment
To remain on schedule, you should complete this class sometime during this week.
Lesson 129: Workshop Lighting and Combination Circuits
To remain on schedule, you should complete this class sometime during this week.
Lesson 229: Electric Motors-Polyphase
To remain on schedule, you should complete this class sometime during this week.
Lesson 330: Practical Application Lab: Magnetic Motor Starters
To remain on schedule, you should complete this class sometime during this week.
Lesson 429: Specific Equipment and Industrial Locations
To remain on schedule, you should complete this class sometime during this week.
Lesson 130: Service Equipment
To remain on schedule, you should complete this class sometime during this week.
Lesson 230: Motors: Accumulated Knowledge and Sizing Branch Circuit Conductors
To remain on schedule, you should complete this class sometime during this week.
Lesson 331: Reversing Motor Controllers, Starters, and Motor Connections
To remain on schedule, you should complete this class sometime during this week.
Lesson 430: Industrial Locations and Power Quality
To remain on schedule, you should complete this class sometime during this week.
Lesson 131: Grounding Electrodes, Cost of Power, Specialty Tools and Printreading
To remain on schedule, you should complete this class sometime during this week.
Lesson 132: Overcurrent Protection
To remain on schedule, you should complete this class sometime during this week.
Lesson 231: Motor Branch Circuit Overcurrent Protective Devices: Short Circuit and Ground Fault Protection
To remain on schedule, you should complete this class sometime during this week.
Lesson 232: Motor: Branch Circuit Grounding Conductors, Disconnects, Starters, and Overload Protection
To remain on schedule, you should complete this class sometime during this week.
Lesson 332: Practical Application Lab: Reversing Motor Starters
To remain on schedule, you should complete this class sometime during this week.
Lesson 431: Load Calculations
To remain on schedule, you should complete this class sometime during this week.
Lesson 133: Service Calculations
To remain on schedule, you should complete this class sometime during this week.
Lesson 233: Locked Rotor Current and Phase Loss for Motors- A/C and Refrigeration Equipment-Generators and Fire Pumps
To remain on schedule, you should complete this class sometime during this week.
Lesson 333: Latching and Alternating Relays and Jogging Circuits
To remain on schedule, you should complete this class sometime during this week.
Lesson 432: BCES Load Calculation Components and NEC Articles
To remain on schedule, you should complete this class sometime during this week.
Lesson 134: Pools, Spas, and Hot tubs
To remain on schedule, you should complete this class sometime during this week.
Lesson 234: Motor Feeder Conductors, OCPDs, and Taps- Motor Branch Circuit Conductors and OCPDs
To remain on schedule, you should complete this class sometime during this week.
Lesson 334: Practical Application Lab: Multi-Motor Equipment
To remain on schedule, you should complete this class sometime during this week.
Lesson 433: Fire Alarm Systems-Introduction and Overview
To remain on schedule, you should complete this class sometime during this week.
Lesson 135: Automation, Solar Photovoltaic Systems, Standby Power, and Semester Review
To remain on schedule, you should complete this class sometime during this week.
Lesson 235: Final Exam Review
To remain on schedule, you should complete this class sometime during this week.
Lesson 335: Final Exam Review
To remain on schedule, you should complete this class sometime during this week.
Lesson 434: Voice/Date/Video-Introduction and Overview
To remain on schedule, you should complete this class sometime during this week.
Lesson 435: Final Exam Review
To remain on schedule, you should complete this class sometime during this week.
WAC-RCW
To remain on schedule, you should complete this class sometime during this week.
Lab 5 & 6: 3rd & 4th Year – Everett
Lab 5: Motor connections, transformer conections, buck-boost transformers
Lab 6: Basic control wiring, relays, stop/start buttons
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Lab 5 & 6: 1st & 2nd Year – Spokane
Lab 5: Motor connections, transformer conections, buck-boost transformers
Lab 6: Basic control wiring, relays, stop/start buttons
Make-Up Day
All face-to-face absences must be made up on a scheduled make-up day. There is only 1 make-up day each month. All of them are held at the Everett location beginning at 9:00 AM.
Lab 5 & 6: 1st & 2nd Year – Olympia
Lab 5: Motor connections, transformer conections, buck-boost transformers
Lab 6: Basic control wiring, relays, stop/start buttons
Lab 5 & 6: 3rd & 4th Year – Tri-Cities
Lab 5: Motor connections, transformer conections, buck-boost transformers
Lab 6: Basic control wiring, relays, stop/start buttons
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Lab 3 & 4: 1st & 2nd Year – Tri-Cities
Lab 3: Switches, series, parallel, 3-way, 4-way, lighting circuits, lamps in series & parallel, voltage drop, current and resistance in circuits
Lab 4: HVAC operation and theory, controls, explain relays, contactors, solenoids, switches, over current protective devises (overloads) other related equipment. Phase loss and effects of. Locked rotor and effects of.
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Lab 3 & 4: 1st & 2nd Year – Everett
Lab 3: Switches, series, parallel, 3-way, 4-way, lighting circuits, lamps in series & parallel, voltage drop, current and resistance in circuits
Lab 4: HVAC operation and theory, controls, explain relays, contactors, solenoids, switches, over current protective devises (overloads) other related equipment. Phase loss and effects of. Locked rotor and effects of.
Make-Up Day
All face-to-face absences must be made up on a scheduled make-up day. There is only 1 make-up day each month. All of them are held at the Everett location beginning at 9:00 AM.
Lab 3 & 4: 3rd & 4th Year – Tri-Cities
Lab 3: Control wiring with timers and other devices
Lab 4:More involved circuits and controls
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Lab 3 & 4: 3rd & 4th Year – Olympia
Lab 3: Control wiring with timers and other devices
Lab 4:More involved circuits and controls
Make-Up Day
All face-to-face absences must be made up on a scheduled make-up day. There is only 1 make-up day each month. All of them are held at the Everett location beginning at 9:00 AM.
Lab 3 & 4: 3rd & 4th Year – Spokane
Lab 3: Control wiring with timers and other devices
Lab 4:More involved circuits and controls
Apprenticeship and Training Committee Meeting
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Lab 3 & 4: 1st & 2nd Year – Olympia
Lab 3: Switches, series, parallel, 3-way, 4-way, lighting circuits, lamps in series & parallel, voltage drop, current and resistance in circuits
Lab 4: HVAC operation and theory, controls, explain relays, contactors, solenoids, switches, over current protective devises (overloads) other related equipment. Phase loss and effects of. Locked rotor and effects of.
Make-Up Day
All face-to-face absences must be made up on a scheduled make-up day. There is only 1 make-up day each month. All of them are held at the Everett location beginning at 9:00 AM.
Lab 3 & 4: 1st & 2nd Year – Spokane
Lab 3: Switches, series, parallel, 3-way, 4-way, lighting circuits, lamps in series & parallel, voltage drop, current and resistance in circuits
Lab 4: HVAC operation and theory, controls, explain relays, contactors, solenoids, switches, over current protective devises (overloads) other related equipment. Phase loss and effects of. Locked rotor and effects of.
2nd Quarter Exam – Vancouver
The 2nd Quarter Exam in Vancouver is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
2nd Quarter Exam – Everett
The 2nd Quarter Exam in Everett is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
2nd Quarter Exam – Olympia
The 2nd Quarter Exam in Olympia is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
2nd Quarter Exam – Wenatchee
The 2nd Quarter Exam in Wenatchee is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
2nd Quarter Exam – Tri-Cities
The 2nd Quarter Exam in Tri-Cities is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
2nd Quarter Exam – Spokane
The 2nd Quarter Exam in Spokane is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
Lab 3 & 4: 3rd & 4th Year – Everett
Lab 3: Control wiring with timers and other devices
Lab 4:More involved circuits and controls
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Apprenticeship and Training Committee Meeting
2014-15 Tuition Due
Tuition for the 2014-15 school year is due by 5:00PM today.
If payment in full is received by 5:00PM today you will receive the $200 discount off the invoiced rate.
Final Exam – Vancouver
The Final Exam in Vancouver is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
Final Exam – Olympia
The Final Exam in Olympia is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
Final Exam – Everett
The Final Exam in Everett is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
Final Exam – Wenatchee
The Final Exam in Wenatchee is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
Final Exam – Tri-Cities
The Final Exam in Tri-Citites is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
Final Exam – Spokane
The Final Exam in Spokane is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
OJT Report Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Wire-Off: 4th Year Practical Exam
The Wire-Off is the practical exam for all 4th year apprentices. Bring your tools and code book and be on time. This is an exam to show your ability to apply all the principles of electrical professionalism in a real-world application.
Good luck!
2014 Graduation & Awards Banquet
Final day of class for the 2013-14 school year, the Graduation & Awards Banquet is an opportunity to honour those outstanding apprentices from each year and to congratulate the graduating class of 2014.
Lab 5 & 6: 1st, 2nd, 3rd & 4th Year – Wenatchee
1st & 2nd Year:
Lab 5: Motor connections, transformer conections, buck-boost transformers
Lab 6: Basic control wiring, relays, stop/start buttons
3rd & 4th Year:
Lab 5: Designing control circuits
Lab 6: Building the circuits that you designed and proving them
Lab 5 & 6: 1st & 2nd Year – Everett
Lab 5: Motor connections, transformer conections, buck-boost transformers
Lab 6: Basic control wiring, relays, stop/start buttons
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Apprenticeship and Training Committee Meeting
Lab 5 & 6: 1st & 2nd Year – Tri-Cities
Lab 5: Motor connections, transformer conections, buck-boost transformers
Lab 6: Basic control wiring, relays, stop/start buttons
Make-Up Day
All face-to-face absences must be made up on a scheduled make-up day. There is only 1 make-up day each month. All of them are held at the Everett location beginning at 9:00 AM.
3rd Quarter Exam – Vancouver
The 3rd Quarter Exam in Vancouver is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
3rd Quarter Exam – Olympia
The 3rd Quarter Exam in Olympia is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
3rd Quarter Exam – Everett
The 3rd Quarter Exam in Everett is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
3rd Quarter Exam – Wenatchee
The 3rd Quarter Exam in Wenatchee is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
3rd Quarter Exam – Tri-Citites
The 3rd Quarter Exam in Tri-Cities is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
3rd Quarter Exam – Spokane
The 3rd Quarter Exam in Spokane is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
Deadline: Tuition Payment Plan
Paperwork for your participation in the tuition payment plan must be received today by 5:00PM in order to participate in the payment plan option.
Apprenticeship and Training Committee Meeting
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Lab 5 & 6: 3rd & 4th Year – Spokane
Lab 5: Motor connections, transformer conections, buck-boost transformers
Lab 6: Basic control wiring, relays, stop/start buttons
Final Make-Up Day
This is the Final Make-Up day for 2013-14 school year. Any outstanding absences must be made up today in order to obtain credit for the school year!
All face-to-face absences must be made up on a scheduled make-up day. There is only 1 make-up day each month. All of them are held at the Everett location beginning at 9:00 AM.
Lab 5 & 6: 3rd & 4th Year – Olympia
Lab 5: Motor connections, transformer conections, buck-boost transformers
Lab 6: Basic control wiring, relays, stop/start buttons
Lab 1 & 2: 3rd & 4th Year – Everett
Lab 1: Control wiring basics, switches, relays, timers. Working with 1 line diagrams and schematics. Numbering and identifying parts of a drawing before starting.
Lab 2: Basic control wiring stop/start stations, relays and lamps.
Lab 1 & 2: 3rd & 4th Year – Olympia
Lab 1: Control wiring basics, switches, relays, timers. Working with 1 line diagrams and schematics. Numbering and identifying parts of a drawing before starting.
Lab 2: Basic control wiring stop/start stations, relays and lamps.
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Apprenticeship and Training Committee Meeting
Lab 1 & 2: 3rd & 4th Year – Tri-Cities
Lab 1: Control wiring basics, switches, relays, timers. Working with 1 line diagrams and schematics. Numbering and identifying parts of a drawing before starting.
Lab 2: Basic control wiring stop/start stations, relays and lamps.
Make-Up Day
All face-to-face absences must be made up on a scheduled make-up day. There is only 1 make-up day each month. All of them are held at the Everett location beginning at 9:00 AM.
Lab 3 & 4: 1st, 2nd, 3rd & 4th Year – Wenatchee
1st & 2nd Year:
Lab 3: Switches, series, parallel, 3-way, 4-way, lighting circuits, lamps in series & parallel, voltage drop, current and resistance in circuits
Lab 4: HVAC operation and theory, controls, explain relays, contactors, solenoids, switches, over current protective devises (overloads) other related equipment. Phase loss and effects of. Locked rotor and effects of.
3rd & 4th Year:
Lab 3: Control wiring with timers and other devices
Lab 4:More involved circuits and controls
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Lab 1 & 2: 1st & 2nd Year – Spokane
Pipe Bending (EMT & PVC), concentric bends, wire pulling, box fill, job planning, hypothetical projects, estimating material needs. Parts and pieces and how they are used. Making material lists.
Make-Up Day
All face-to-face absences must be made up on a scheduled make-up day. There is only 1 make-up day each month. All of them are held at the Everett location beginning at 9:00 AM.
Lab 1 & 2: 3rd & 4th Year – Spokane
Lab 1: Control wiring basics, switches, relays, timers. Working with 1 line diagrams and schematics. Numbering and identifying parts of a drawing before starting.
Lab 2: Basic control wiring stop/start stations, relays and lamps.
1st Quarter Exam – Olympia
The 1st Quarter Exam in Olympia is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
Good Luck!
1st Quarter Exam – Vancouver
The 1st Quarter Exam in Vancouver is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
1st Quarter Exam – Everett
The 1st Quarter Exam in Everett is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
1st Quarter Exam – Wenatchee
The 1st Quarter Exam in Wenatchee is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
1st Quarter Exam – Tri-Cities
The 1st Quarter Exam in Tri-Cities is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
1st Quarter Exam – Spokane
The 1st Quarter Exam in Spokane is tonight.
Apprentices have 4 hours to answer 100 questions covering the material covered so far this school year.
If you do not usually take your exams at this location but wish to do so this time, please contact the office to notify them of the change. Email Eldon@iecofwa.org or phone 425.348.9698.
Deadline: Early Registration Payment Plan
Today is the deadline to sign up for the early registration payment plan and lock in the 2013-14 tuition rate for the 2014-15 school year. Complete paperwork must be received by 5:00PM today to qualify for this great deal!
OJT Reports Due
All OJT reports are due by midnight tonight. If you need assistance accessing the Extranet, contact the office before 5PM today. We will be unavailable to assist you after that time.
Apprenticeship and Training Committee Meeting
Apprenticeship and Training Committee Meeting
Lab 1 & 2: 1st, 2nd, 3rd & 4th year – Wenatchee
1st & 2nd Year:
Lab 1: Pipe Bending (EMT & PVC), concentric bends, wire pulling, box fill
Lab 2: Job planning, hypothetical projects, estimating material needs. Parts and pieces and how they are used. Making material lists.
3rd & 4th Year:
Lab 1: Control wiring basics, switches, relays, timers. Working with 1 line diagrams and schematics. Numbering and identifying parts of a drawing before starting.
Lab 2: Basic control wiring stop/start stations, relays and lamps.
Make-Up Day
All face-to-face absences must be made up on a scheduled make-up day. There is only 1 make-up day each month. All of them are held at the Everett location beginning at 9:00 AM.
Lab 1 & 2: 1st & 2nd Year – Everett
Pipe Bending (EMT & PVC), concentric bends, wire pulling, box fill, job planning, hypothetical projects, estimating material needs. Parts and pieces and how they are used. Making material lists.
Lab 1 & 2: 1st & 2nd Year: Tri-Cities
Pipe Bending (EMT & PVC), concentric bends, wire pulling, box fill, job planning, hypothetical projects, estimating material needs. Parts and pieces and how they are used. Making material lists.
Lesson 425: Multifamily Dwellings and Commercial Installations-General Provisions
To remain on schedule, you should complete this class sometime during this week.